switching functions

switching functions
  1. подача команд включения и отключения

 

подача команд включения и отключения
-
[Интент]

Параллельные тексты EN-RU

Selecting the switchgear unit to be controlled and generating a switching request

The switchgear unit to be controlled is selected and the switching command is sent to this selected switchgear unit.

This can be carried out via the front panel HMI using the selection key and pressing the 'Open' or 'Close' key to generate the switching request.

It should be noted that the front panel HMI on the P63x does not feature specific keys for switching functions.

[Schneider Electric]

Выбор коммутационного аппарата и подача команд включения и отключения

Выбирается коммутационный аппарат, после чего подается команда его включения или отключения.

Данную операцию можно выполнить с передней панели человеко-машинного интерфейса с помощью кнопки выбора и последующего нажатия кнопки ОТКЛЮЧИТЬ или ВКЛЮЧИТЬ.

Примечание. На передней панели человеко-машинного интерфейса управления устройством Р63х отсутствуют специальные кнопки для подачи команд включения и отключения.

[Перевод Интент]

Тематики

  • релейная защита

EN

  • generating a switching request
  • issuing switching commands
  • switching functions


Англо-русский словарь нормативно-технической терминологии. . 2015.

Игры ⚽ Поможем написать курсовую

Смотреть что такое "switching functions" в других словарях:

  • Switching Control Center System — The Switching Control Center System was an Operations Support System developed by Bell Laboratories and deployed during the early 1970s. This computer system was first based on the PDP 11 product line from Digital Equipment Corporation and used… …   Wikipedia

  • switching center —    A center where messages are stored and processed for transmission to the intended destinations. Computers provide the communications functions of routing, priority processing, code and speed conversion, and transmission in addition to their… …   IT glossary of terms, acronyms and abbreviations

  • PCS switching center — PCS switching center: In personal communications service, a facility that (a) supports access independent call control/service control, and connection control (switching) functions, and (b) is responsible for interconnection of access and network …   Wikipedia

  • Network switching subsystem — (NSS) (or GSM core network) is the component of a GSM system that carries out call switching and mobility management functions for mobile phones roaming on the network of base stations. It is owned and deployed by mobile phone operators and… …   Wikipedia

  • LAN switching — This article addresses packet switching in computer networks.LAN switching is a form of packet switching used in local area networks. Switching technologies are crucial to network design, as they allow traffic to be sent only where it is needed… …   Wikipedia

  • Code-switching — This article is about the use of more than one language in speech. For the use of multiple languages in writing, see Macaronic language. Sociolinguistics Areas of study …   Wikipedia

  • Mobile Telephone Switching Office — The Mobile Telephone Switching Office (MTSO) is the mobile equivalent to a PSTN Central Office. The MTSO contains the switching equipment or Mobile Switching Center (MSC) for routing mobile phone calls. It also contains the equipment for… …   Wikipedia

  • Circuit switching — is a methodology of implementing a telecommunications network in which two network nodes establish a dedicated communications channel (circuit) through the network before the nodes may communicate. The circuit guarantees the full bandwidth of the …   Wikipedia

  • Executive functions — Psychology …   Wikipedia

  • Multiprotocol Label Switching — MPLS redirects here. For other uses, see Mpls. MPLS Layer Multiprotocol Label Switching (MPLS) is a mechanism in high performance telecommunications networks that directs data from one network node to the next based on short path labels rather… …   Wikipedia

  • Number Five Crossbar Switching System — The Number Five Crossbar Switching System or 5XB switch, designed by Bell Labs and made by Western Electric, was in use in Bell System telephone exchanges from 1948 to the 1980s. Its principal use was as a Class 5 telephone switch, though… …   Wikipedia


Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»